CYCLONE e bikes

CYCLONE DIY Kit Motor power @ 180W, 250W, 360W, 500W

Use crank remover to remove the nut off the cranks.
Use crank remover to remove the chain wheel and cranks
Use crank remover to remove the chain wheel and cranks
The distance between Real wheel and Button bracket must at least 62 mm
Remove the nut from the button bracket
Remove the Axle from the button bracket and replace with the longer Axle.
Put the motor’s mounting bracket on button bracket.
Put the motor on mounting bracket
Put the “ chain wheel on the freewheel crank” on Axle.
Add some chain on the all chain ( about 3 notes)
Fix the cranks by crank remover
Put the chain over motor’s sprocket and adj. the motor to the right high, make sure the nut is fix on the right place
Put the motor throttle on the right hand side.
Put the gear grip on the left hand side
Plug in the throttle’s plug in to motor side controller plug
Plug the batters power cord to motor’s power cord.
Complete